ELR H3-I-SC- 24DC/500AC-9

https://www.phoenixcontact.com/us/products/2900545 Hybrid motor starter - ELR H3-I-SC- 24DC/500AC-9 - 2900545 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) "2 in 1" hybrid motor starter for starting 3~ AC motors up to 550 V AC, with 24 V DC input, 9 A output current, and adjustable overload shutdown. Product Features  22.5 mm wide  Low-wear switching  Reduction in wiring  Long service life  Space saving  Bimetal function can be set up to 9 A  3-phase loop bridges     Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 260.0 GRM Custom tariff number 85371099 Country of origin Germany Technical data Input data Input name Device supply Rated control supply voltage US 24 V DC Voltage range with reference to US 0.8 ... 1.25 Rated control supply current IS 40 mA Protective circuit Protection against polarity reversal Parallel polarity protection diode Surge protection Typical response time < 35 ms 10/10/2014   Page 1 / 11 https://www.phoenixcontact.com/us/products/2900545 Hybrid motor starter - ELR H3-I-SC- 24DC/500AC-9 - 2900545 Technical data Input data Typical turn-off time < 40 ms Operating voltage display Green LED Status display Yellow LED Indication Red LED Input name Control input right/left Rated actuating voltage UC 24 V DC Voltage range with reference to UC 0.8 ... 1.25 Rated actuating current IC 5 mA Switching threshold "0" signal, voltage 9.6 V Switching threshold "1" signal voltage 19.2 V Output data load output Nominal output voltage 500 V AC Nominal output voltage range 42 V AC ... 550 V AC Load current max. 9 A (see derating curve) Min. load current 1.5 A Rated operating current at AC-51 9A Rated operating current at AC-53a 6.5 A Leakage current 0 mA Residual voltage < 0.5 V Surge current 100 A (t = 10 ms) Protective circuit Surge protection Output data reply output Note Confirmation 01: floating change-over contact, signal contact Contact type 1 PDT Contact material AgSnO2, hard gold-plated Maximum switching voltage 30 V AC 36 V DC Minimum switching voltage 100 mV AC/DC (at 10 mA) Min. switching current 1 mA (at 24 V) Maximum inrush current 50 mA Limiting continuous current 50 mA Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC) Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V (at 100 mA) Min. switching current 10 mA (at 12 V) 10/10/2014   Page 2 / 11 https://www.phoenixcontact.com/us/products/2900545 Hybrid motor starter - ELR H3-I-SC- 24DC/500AC-9 - 2900545 Technical data Output data reply output Limiting continuous current 6A Interrupting rating (ohmic load) max. 140 W (at 24 V DC) 20 W (at 48 V DC) 18 W (at 60 V DC) 23 W (at 110 V DC) 40 W (at 220 V DC) 1500 VA (for 250 V AC) Switching capacity according to IEC 60947-5-1 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.1 A (at 220 V, DC13) 3 A (at 24 V, AC15) 3 A (at 120 V, AC15) 3 A (at 230 V, AC15) Output data, signaling contact Measuring via Current transformer for line current on L1 and L3 Connection data Connection method Screw connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 14 General Test voltage input/output 4 kVrms Mounting position Vertical (horizontal DIN rail) Assembly instructions Can be aligned with spacing = 20 mm Operating mode 100% operating factor Designation Air and creepage distances between the power circuits Standards/regulations DIN EN 50178 Insulation sichere Trennung Pollution degree 2 Surge voltage category III Designation Standards/regulations Standards/regulations EN 60947 10/10/2014   Page 3 / 11 https://www.phoenixcontact.com/us/products/2900545 Hybrid motor starter - ELR H3-I-SC- 24DC/500AC-9 - 2900545 Technical data Dimensions Width 22.5 mm Height 99 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -25 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Degree of protection IP20 Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371601 eCl@ss 5.1 27371601 eCl@ss 6.0 27371601 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 ETIM ETIM 2.0 EC000066 ETIM 3.0 EC000066 ETIM 4.0 EC000066 ETIM 5.0 EC000066 UNSPSC UNSPSC 6.01 30211915 UNSPSC 7.0901 39121514 UNSPSC 11 39121514 UNSPSC 12.01 39121514 UNSPSC 13.2 39121514 Approvals Approvals 10/10/2014   Page 4 / 11 https://www.phoenixcontact.com/us/products/2900545 Hybrid motor starter - ELR H3-I-SC- 24DC/500AC-9 - 2900545 Approvals Approvals UL Listed / cUL Listed / IECEE CB Scheme / UL Listed / cUL Listed / IECEE CB Scheme / cUL Listed / cULus Listed / cULus Listed / cULus Listed / null / null / null / null Ex Approvals Approvals submitted Approval details UL Listed  cUL Listed  IECEE CB Scheme  UL Listed  cUL Listed  IECEE CB Scheme  cUL Listed  10/10/2014   Page 5 / 11 https://www.phoenixcontact.com/us/products/2900545 Hybrid motor starter - ELR H3-I-SC- 24DC/500AC-9 - 2900545 Approvals cULus Listed  cULus Listed  cULus Listed          Accessories Accessories Loop bridge Jumper - BRIDGE- 2 - 2900746 3-phase loop bridge for 2 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.     Jumper - BRIDGE- 3 - 2900747 3-phase loop bridge for 3 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.     10/10/2014   Page 6 / 11 https://www.phoenixcontact.com/us/products/2900545 Hybrid motor starter - ELR H3-I-SC- 24DC/500AC-9 - 2900545 Accessories Jumper - BRIDGE- 4 - 2900748 3-phase loop bridge for 4 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.     Jumper - BRIDGE- 5 - 2900749 3-phase loop bridge for 5 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.     Jumper - BRIDGE- 6 - 2900750 3-phase loop bridge for 6 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.     Jumper - BRIDGE- 7 - 2900751 3-phase loop bridge for 7 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.     Jumper - BRIDGE- 8 - 2900752 3-phase loop bridge for 8 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.     10/10/2014   Page 7 / 11 https://www.phoenixcontact.com/us/products/2900545 Hybrid motor starter - ELR H3-I-SC- 24DC/500AC-9 - 2900545 Accessories Jumper - BRIDGE- 9 - 2900753 3-phase loop bridge for 9 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.     Jumper - BRIDGE-10 - 2900754 3-phase loop bridge for 10 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.     Jumper - BRIDGE- 2-3M - 2901543 3-phase loop bridge for 2 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 3 m, with ferrules included.     Jumper - BRIDGE- 3-3M - 2901656 3-phase loop bridge for 3 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 3 m, with ferrules included.     Jumper - BRIDGE- 4-3M - 2901659 3-phase loop bridge for 4 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 3 m, with ferrules included.     10/10/2014   Page 8 / 11 https://www.phoenixcontact.com/us/products/2900545 Hybrid motor starter - ELR H3-I-SC- 24DC/500AC-9 - 2900545 Accessories Jumper - BRIDGE- 5-3M - 2901545 3-phase loop bridge for 5 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 3 m, with ferrules included.     Jumper - BRIDGE- 6-3M - 2901697 3-phase loop bridge for 6 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 3 m, with ferrules included.     Jumper - BRIDGE- 7-3M - 2901698 3-phase loop bridge for 7 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 3 m, with ferrules included.     Jumper - BRIDGE- 8-3M - 2901700 3-phase loop bridge for 8 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 3 m, with ferrules included.     Jumper - BRIDGE- 9-3M - 2901701 3-phase loop bridge for 9 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 3 m, with ferrules included.     10/10/2014   Page 9 / 11 https://www.phoenixcontact.com/us/products/2900545 Hybrid motor starter - ELR H3-I-SC- 24DC/500AC-9 - 2900545 Accessories Jumper - BRIDGE-10-3M - 2901702 3-phase loop bridge for 10 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 3 m, with ferrules included.     Drawings Block diagram MAN RES AUTO RES Circuit diagram 1/L1 3/L2 5/L3 Logic µP L1 L2 L3 F1 F2 F3 Us T ON & Error 97 96 95 2/T1 4/T2 6/T3 K1 F4 M 3~ M1 PE Conventional structure Main current path reversing contactor K1 = Right contactor F4 = Motor protection relay 10/10/2014   Page 10 / 11 https://www.phoenixcontact.com/us/products/2900545 Hybrid motor starter - ELR H3-I-SC- 24DC/500AC-9 - 2900545 Circuit diagram +24V DC F5 Circuit diagram F1 L1 F2 L2 F3 L3 +24V DC F4 L1 L2 L3 K1 T1 T1 T2 T3 T1 M 3~ M1 K1 +US ON PE K1 GND Conventional structure Control current path contactor K1 = Right contactor T1 = Right F4 = Motor protection relay GND Structure with CONTACTRON , , Main and control current path for 2 in 1 hybrid motor starter , , K1 = 2 in 1 hybrid motor starter T1 = Right Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/10/2014   Page 11 / 11